6/27/2016

  • Cut and removed spare tire crane frame
  • Fabricated and installed aluminum support plate for the frame inegrated tool box
    Cut and Removed Spare Tire Crane Frame
    Cut and Removed Spare Tire Crane Frame

    Fabricated and Installed AL Support Plate
    Fabricated and Installed AL Support Plate

2 thoughts on “6/27/2016

    1. Congratulations on getting your truck next week.

      We compared a lot of options for the position of the habitat with relation to the cab. The biggest choice is whether you want to keep the spare tire hoist or not. Our spare will be going on the back of the hab. We decided to remove the spare tire hoist and rearrange some of the systems to accommodate the bathroom directly against the back of the passenger side cab. The bathroom won’t be full height at the floor is slightly higher there. We decided to leave the air filter in place because it is a very nice system and we didn’t want to relocate the coolant tank and other systems. We did lower the height of the intake stack. The habitat will have an overhang above the air intake. Basically, we will have a bay cut out of the corner of the habitat for the air intake assembly and other systems.

      Like

Leave a comment